Meco Bonsai- Deluxe Caster Work Stand for Bonsai

The Caster Work Stand has five casters that lock the wheel
and swivel making for a solid stance when working on your
bonsai. The wheels are semi-cushion urethane tires that
make rolling easy without being too soft. The Caster stand
has the same operating features as the Deluxe Workstand.
Down height is 24” and crank up height is 38”. The slider
adds 10” for a total height of 48”. The rubber covered 24”
work surface has four locations to tie your work down. The
turntable locks in position to keep your work from moving
and the crank folds inside the diameter of work surface.

Features of the Caster Work Stand:
• 24” rubber covered plywood work surface finished with exterior grade urethane.
• Four ring tie down locations to hold work onto the stand.
• Turntable lock prevents the top from pulling off the stand.
• All metal turntable bearings.
• Independent slide extension that adds 10” to the total range of travel. This adjustment must
be made without anything on the stand.
• Crank adjustment from 24” to 38” in height. Range of travel is 14”. Crank can be adjusted
under load.
• Folding crank stores the handle inside the diameter of the work surface.
• Heavy duty gear box has a load capacity up to 150 pounds.
• Nylon gib screw adjustment to keep the rack tube as snug as desired.
• Maximum load is 150 pounds.

*Shipping to be Calculated Based on Buyer Location

Local Pick-Up Not Available