Deluxe Work Stand

The Deluxe Work Stand makes working on your bonsai easier
than ever. With a heavy-duty gear box this Work Stand can
crank adjust up to 150 lbs. from 24” to 38” in height. An
independent slide extension adds an additional 10” of overall
height for smaller work. The rubber covered 24” work
surface has four locations to tie your work down. The
turntable locks in position to keep your work from moving
and the crank folds inside the diameter of work surface. For
storage and transport, the legs can fold and the top is easily
removable. Heavy plastic feet are securely fastened to each
leg to prevent marring of the floor.

Features of the Deluxe Workstand:
• 24” rubber covered plywood work surface finished with exterior grade urethane.
• Four ring tie down locations to hold work onto the stand.
• Turntable lock prevents the top from pulling off the stand.
• All metal turntable bearings.
• Independent slide extension that adds 10” to the total range of travel. This adjustment must
be made without anything on the stand.
• Crank adjustment from 24” to 38” in height. Range of travel is 14”. Crank can be adjusted
under load.
• Folding crank stores the handle inside the diameter of the work surface.
• Heavy duty gear box has a load capacity up to 150 pounds.
• Nylon gib screw adjustment to keep the rack tube as snug as desired.
• Folding legs make storage and mobility easier.
• Legs are fastened to body with nyloc nuts to adjust the tightness of the leg motion.
• Plastic feet are securely fastened to each leg and sit flat to prevent marring the floor.
• Maximum load is 150 pounds

*Shipping to be Calculated Based on Buyer Location

Local Pick-Up Not Available